SISSONS Quadruple Expansion Marine Engine
6” + 8½” +12″ + 16½” x 12” stroke
The ultimate medium sized marine engine….
Price On Application
Taylor Vertical Steam Launch Engine, 2½” x 2½” Cylinder
2½” x 2½” Cylinder.
Approx 30″ High.
Unused engine built to a high standard and in excellent condition.
Three bearing crankshaft with enlarged bewaring areas. Stephenson link reverse gear. Connecting rod is bored to provide oil reservoir for big end. Positive displacement pump for steam oil supply.
For sale in good condition and suitable for use in a steam launch of around 18
Single Cylinder Steam Engine 1¾” x 2¾”
Approx 1¾” x 2¾” Cylinder
A German made vertical reversing steam engine, set up as a stationary engine with governor mechanism, but could also be used in a steam boat.
A very nicely made and attractive little engine.
23″ high overall including wooden base.
SIMPSON STRICKLAND Auxiliary Marine Engine 3½” x 4″
Approx 3½” x 4″ Cylinder
Piston valve, on 4 turned columns.
Approx 21″ High, solid flywheel 8″ Dia.
A very rare, high quality small marine engine made for auxiliary use in small steam boats. For sale in excellent condition.
Single Cylinder Marine Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
An attractive single cylinder high speed
piston valved marine engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
For sale in good condition.
WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence
and a museum worthy engine.
SIMPSON STRICKLAND Tandem Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 3″
Overall 29″ High x 10″ Long x 11″ Wide.
This is an extremely unusual, if not unique tandem compound marine steam engine, with reversing gear and integral boiler feed and air pumps. Throught to be by Simpson Strickland of Dartmouth, c1900. This engine is of an elegant design suitable for a small Thames type launch, and with it’s small footprint and low weight will provide an excellent power to weight/space ratio.
In nice original condition.
SIMPSON STRICKLAND Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 2 1/2″
Overall 19″ High x 17″ Long x 10 1/2″ Wide.
A very nice lightweight launch engine by the ‘Rolls-Royce’ of marine engine builders, Simpson Strickland of Dartmouth. Cross compound with slide valves and Stevenson link reversing gear, and provision integral boiler feed and air pumps. Cylinder covers complete with maker’s engraved caps. This small and elegant compound engine suitable for a medium sized river launch.