MUMFORD Ciculating Pump Marine Engine
£ P.O.A.
By A G Mumford, Engineers of Colchester.
A marine circulating pump steam engine with attached, clutchable oil pressure pump for oil firing. From a harbour service launch (HSL).
For sale in good, original condition.
Related Items
A.G. MUMFORD Steam Yacht Engine
Compound Marine Engine
Thought to be by A.G. Mumford, Colchester, c1910.
5″ + 10″ x 8″ Cylinders with Slide Valves.
Stephenson link reversing gear.
Twin air pumps and boiler feed pumps.
Approx 42″ High, Bed 40″ Long x 18″ Wide.
A very well made Mumford engine probably designed for a small steam yacht. For sale in good, original condition.
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
Taylor Vertical Steam Launch Engine, 2½” x 2½” Cylinder
2½” x 2½” Cylinder.
Approx 30″ High.
Unused engine built to a high standard and in excellent condition.
Three bearing crankshaft with enlarged bewaring areas. Stephenson link reverse gear. Connecting rod is bored to provide oil reservoir for big end. Positive displacement pump for steam oil supply.
For sale in good condition and suitable for use in a steam launch of around 18
Ft.
TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
Compound Steam Launch Engine
120 + 250 x 117 mm Cylinders
A continental built launch engine with link motion reversing gear. On turned front columns and cast back standards, with integral surface condenser. A high quality launch engine of around 40-50 HP @ 250 rpm, at 150 psi.
SOLD
Single Cylinder Steam Engine 1¾” x 2¾”
Approx 1¾” x 2¾” Cylinder
A German made vertical reversing steam engine, set up as a stationary engine with governor mechanism, but could also be used in a steam boat.
A very nicely made and attractive little engine.
23″ high overall including wooden base.
LACK Single Cylinder Launch Engine 4″ x 4″
Approx 4″ x 4″ Cylinder
Base 18″ x 14″, 32″ high overall.
Slide valve with link reversing gear.
An attractive single cylinder steam launch
engine on turned columns with
attached boiler feed pump.
Solid disc flywheel.
Wt approx 70 Kg.
In good, restored condition.
SOLD
TWIN HIGH PRESSURE Marine Engine
2″ + 2″ x 4 1/4″ Cylinders
29″ High, Base 12″ x 12″.
Solid disc flywheel.