REIDS Twin High Pressure Marine Engine
£2,750.00
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
Related Items
RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
SOLD 
£ P.O.A.
Compound Steam Launch Engine
120 + 250 x 117 mm Cylinders
A continental built launch engine with link motion reversing gear. On turned front columns and cast back standards, with integral surface condenser. A high quality launch engine of around 40-50 HP @ 250 rpm, at 150 psi.
SOLD
SOLD 
£3,000.00
GUY Single Cylinder Marine Engine 2½” x 3½”
Approx 2½” x 3½” Cylinder
Built in Southampton c1900.
Slide valve with link reversing gear.
A small, single cylinder steam launch engine of elegant design.
Wt approx 70 Kg.
THIS ENGINE IS CURRENTLY UNDER RESTORATION..
PLEASE ENQUIRE FOR DETAILS.
SOLD 
£2,750.00
Single Cylinder Steam Launch Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
Base 13″ x 13″, 21″ high overall.
An attractive single cylinder high speed
steam launch engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
In good, restored condition.
Single Cylinder Marine Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
An attractive single cylinder high speed
piston valved marine engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
For sale in good condition.
TWIN HIGH PRESSURE Marine Engine
2″ + 2″ x 4 1/4″ Cylinders
29″ High, Base 12″ x 12″.
Solid disc flywheel.
In good condition.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.