COMPOUND Steam Launch Engine 2″ + 5″ x 6″
2″ + 5″ x 6″ Cylinders
With slide valves, on cast standards.
Wt est 250 Kg.
An early marine steam engine of elegant design.
For sale in restored condition.
Related Items
RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
Single Cylinder Steam Launch Engine
This single cylinder reversable marine engine has a handsome cast iron backstand frame and is fitted with Stephenson type link reversing gear. Piston valve and suitable for a steam launch of around 20 – 35 Ft Length.
WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence and a museum worthy engine.
HARRISON & Co. Compound Marine Engine
Built in Lowestoft c1900
6″ + 12″ x 7″ Cylinders with Slide Valves, on six turned columns. With attached air, feed and bilge pumps.
A high quality launch engine. For sale unrestored, but believed complete. Offered with spares for second engine.
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
HERRESHOFF? Triple Expansion Marine Engine
4 3/4″ x 7 1/2″ x 12″ + 6″ Cylinders.
High speed launch engine of about 40 H.P.
Believed made by Herreshoff of Rode Island, USA.
p.v. to H.P. Cyl, s.v. to M.P. & L.P. Cyls.
C/L crank to underside frame: 6″.
Length inc base: 38″, overall: 44″
Width inc base: 16″, overall 26″ x Height: 38″.
For sale incomplete and in need of major restoration.
This is a very unusual high power to weight engine designed for a high speed launch.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
