RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in original condition.
Related Items
Single Cylinder Steam Launch Engine
This single cylinder reversable marine engine has a handsome cast iron backstand frame and is fitted with Stephenson type link reversing gear. Piston valve and suitable for a steam launch of around 20 – 35 Ft Length.
Single Cylinder Marine Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
An attractive single cylinder high speed
piston valved marine engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
For sale in good condition.
COMPOUND Steam Launch Engine 2″ + 5″ x 6″
2″ + 5″ x 6″ Cylinders
With slide valves, on cast standards.
Wt est 250 Kg.
An early marine steam engine of elegant design.
For sale in restored condition.
Duplex Marine Engine
An unusual and elegant 5-10 H.P. twin cylinder marine engine. Built c1910, no makers plate but in good overall condition.
SIMPSON STRICKLAND Compound Steam Launch Engine
A very handsome light-weight marine engine from a steam launch.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
HARRISON & Co. Compound Marine Engine
Built in Lowestoft c1900
6″ + 12″ x 7″ Cylinders with Slide Valves, on six turned columns. With attached air, feed and bilge pumps.
A high quality launch engine. For sale unrestored, but believed complete. Offered with spares for second engine.
