EASTON JOHNSON 12 HP Enclosed Generator Set Engine
A high speed enclosed single cylinder vertical steam engine suitable for direct coupling to a dynamo or alternator.
Approx 12 H.P. Output.
ASWHORTH-PARKER 40 HP Enclosed Generator Set Engine
A high speed enclosed single cylinder vertical steam engine suitable for direct coupling to a dynamo or alternator.
Approx 40 H.P. Output.
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
TWIN HIGH PRESSURE Steam Engine
2 1/2″ + 2 1/2″ x 3″ Cylinders
20″ High, on Base 22″ x 12″.
A Marine type steam engine with slide valves, on six turned columns and with solid flywheel.
10″ Dia flywheel.
In good condition.
LAWRENCE & Co. Workshop Engine Vertical Cylinder 3″ x 5″
Single Cylinder Inverted Vertical
~ U.S.A. Built, c1900 ~
Cylinder 3″ x 5″ (approx).
Cast “bottle” type frame.
Additional pulley wheel fitted.
Wt est 100 Kg.
In good, restored condition.
Single Cylinder Horizontal Workshop Engine 3″ x 5″ Cylinder
Fitted with Meyer expansion slide valve gear.
3″ x 5″ Cylinder
Fylwheel 12″ Dia ~ 32″ Long.
In good, restored condition.
READER 8-10 NHP Enclosed Engine
A general purpose high speed enclosed single cylinder vertical engine suitable for couple to a dynamo or alternator, or to workshop machinery.
Approx 8-10 H.P. Output.
Wt approx 600 Kg.
In good restored condition.
STANLEY? Steam Car Engine
Enclosed twin cylinder duplex, slide valve operated horizontal steam engine, believed to be a Stanley 10 H.P. engine of 1910. Thought to be in excellent, original condition.
ELECTRIC CONSTRUCTION Co. 110 Volt Dynamo
10 KW
110 Volts D.C.
91 Amps @ 1,000 r.p.m.
No. 38493, Built 1914
Formerly fitted to a Foden showmans engine, this is an attractive pre WW1 vintage dynamo by The Electric Construction Company Ltd, Wolverhampton. Believed in good condition.
Single Cylinder Marine Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
An attractive single cylinder high speed
piston valved marine engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
For sale in good condition.
Monotube ‘Flash’ Steam Boiler, Steam Car
A high output ‘Bolsolver’ monotube type ‘flash’ steam boiler.
Approx 15 H.P.
Suitable for installation in a steam car and complete with lagging.
In original and apparently complete condition.
VENT-AXIA “TURBETTE” Steam Turbine
De Laval single stage steam turbine, approx 5 H.P.
Approx 23″ High x 23″ Long.
Made by Vent-Axia, Rochester, Kent c1955 and thought to have never been used.
A very rare small steam turbine complete with governor, etc.
