Single Cylinder Horizontal Workshop Engine 3″ x 3¾” Cylinder
3″ x 3¾” Cylinder
Fylwheel 12″ Dia. 30″ long overall.
A good quality 19th century small workshop engine, with a handsome integral cast iron bed. Disc type crank and eccentric driven feed pump. Complete with pulley wheel, etc. n nice, original condition.
Category: Horizontal Engines
METCALF Tandem Compound Mill Engine
This medium sized horizontal engine drove a brickfield in the home counties, before is was restored and exhibited in a West Country museum.
Of around 100 to 150 HP, this rare engine is in basic good condition and is believed to be complete.
Twin Cylinder Horizontal, Duplex Cylinders Approx 2″ x 3½”
On heavy cast iron base with attached feed pump.
Base approx 23″ long x 13″ Wide.
Wt approx 75 KGs.
In good original condition.
Single Cylinder Horizontal Workshop Engine 2″ x 4½” Cylinder
A high quality engine, maker unknown, c1890.
Drove a cobblers shop until 1970.
2″ x 4½” Cylinder (approx).
Wt approx 35 Kg.
Unrestored but in good, original condition.
LEFLAIVE & Cie. Horizontal Mill Engine
12″ x 18″ Stroke Single Cylinder
A very attractive small French mill engine of c1900 complete with a large and ornate governor. For sale in original, unrestored condition. (Note: some photos show engine in original situation.)
TANGYE & Co. Single Cylinder Horizontal Mill Engine 8″ x 20″ Cylinder
Built by Tangye & Co, Birmingham c1890
8″ x 20″ Cylinder.
Flywheel 6 ft x 10″ ~ Bed 9 ft Long.
Wt est 3-4 Tonnes ~ Overall 11 ft x 6 ft.
In unrestored condition.
E.S. HINDLEY Single Cylinder Horizontal Workshop Engine 4″ x 7″ Cylinder
Thought to be by E.S. Hindley, c1900?
Approx 4″ x 7″ Cylinder. Wt est 200 Kg.
34″ Wide x 5 ft 4″ Long ~ Flywheel 36″ Dia.
(Photo shows engine with flywheel removed.)
GREENS & Co. Single Cylinder Horizontal 3″ x 6″ Cylinder
~ Built in London c1900 ~
3″ x 6″ Cylinder (approx).
18″ Dia Fylwheel ~ Wt approx 150 Kg.
In good restored condition, with Pickering governor.