CLARKE Duplex Workshop Steam Engine
An attractive horizontal workshop engine made in Canterbury, Kent C 1875, One of only 2 known Canterbury made steam engines, in good original condition.
METCALFE Tandem Compound Mill Engine
This medium sized horizontal engine served as a Brickworks engine in the home counties, before is was restored and exhibited in a West Country museum.
Of around 100 to 150 HP, this rare engine is in basic good condition and is believed to be complete.
PUGSLEY Steam Crane Engine Twin Cylinders 6″ x 14″.
Twin Cylinders 6″ x 14″.
Wt approx 200 KGs.
A rare machine by Joseph Pugsley & Sons of Bristol.
Without crankshaft but very original and in generally very good, little used condition.
Workshop Engine, Horizontal Single Cylinder 2″ x 4″
Single Cylinder Horizontal
Maker unknown c1900.
Cylinder 2″ x 4″. Wt approx 25 KGs.
In good condition.
TANGYE & Co. Single Cylinder Horizontal Mill Engine 8″ x 20″ Cylinder
Built by Tangye & Co, Birmingham c1890
8″ x 20″ Cylinder.
Flywheel 6 ft x 10″ ~ Bed 9 ft Long.
Wt est 3-4 Tonnes ~ Overall 11 ft x 6 ft.
In unrestored condition.
E.S. HINDLEY Single Cylinder Horizontal Workshop Engine 4″ x 7″ Cylinder
Thought to be by E.S. Hindley, c1900?
Approx 4″ x 7″ Cylinder. Wt est 200 Kg.
34″ Wide x 5 ft 4″ Long ~ Flywheel 36″ Dia.
(Photo shows engine with flywheel removed.)
GREENS & Co. Single Cylinder Horizontal 3″ x 6″ Cylinder
~ Built in London c1900 ~
3″ x 6″ Cylinder (approx).
18″ Dia Fylwheel ~ Wt approx 150 Kg.
In good restored condition, with Pickering governor.