METCALF Tandem Compound Mill Engine
This medium sized horizontal engine drove a brickfield in the home counties, before is was restored and exhibited in a West Country museum.
Of around 100 to 150 HP, this rare engine is in basic good condition and is believed to be complete.
Steam Winch Engine, Horizontal Mounting Twin cylinders 4″ x 6″
Maker unknown (?) but of very high quality.
Cylinders 4″ x 6″ Stroke.
Bedplate 3 Ft 6″ Long x 2 Ft 6″.
Wt est 300 Kg.
In good, restored condition.
PUGSLEY Steam Crane Engine Twin Cylinders 6″ x 14″.
Twin Cylinders 6″ x 14″.
Wt approx 200 KGs.
A rare machine by Joseph Pugsley & Sons of Bristol.
Without crankshaft but very original and in generally very good, little used condition.
Twin Cylinder Horizontal, Duplex Cylinders Approx 2″ x 3½”
On heavy cast iron base with attached feed pump.
Base approx 23″ long x 13″ Wide.
Wt approx 75 KGs.
In good original condition.
Workshop Engine, Horizontal Single Cylinder 2″ x 4″
Single Cylinder Horizontal
Maker unknown c1900.
Cylinder 2″ x 4″. Wt approx 25 KGs.
In good condition.
Single Cylinder Horizontal Workshop Engine 2″ x 4½” Cylinder
A high quality engine, maker unknown, c1890.
Drove a cobblers shop until 1970.
2″ x 4½” Cylinder (approx).
Wt approx 35 Kg.
Unrestored but in good, original condition.
TANGYE & Co. Single Cylinder Horizontal Mill Engine 8″ x 20″ Cylinder
Built by Tangye & Co, Birmingham c1890
8″ x 20″ Cylinder.
Flywheel 6 ft x 10″ ~ Bed 9 ft Long.
Wt est 3-4 Tonnes ~ Overall 11 ft x 6 ft.