SOLD
WESTMINSTER Vertical Workshop Engine, Cylinder 6″ x 9″
£1,250.00
Single Cylinder Inverted Vertical
Built in the UK c1900.
A rare and very attractive cast bottle framed engine.
Cylinder 6″ x 9″. Wt approx 150 KGs.
Approx 68″ High.
Currently dismantled for storage but complete.
In good unrestored condition.
Sold
Related Items
SOLD 
£1,750.00
TANGYE & Co Vertical Steam Engine, Cylinder 10″ x 12″
A single cylinder inverted vertical workshop type engine by Tangye & Co, Birmingham, c1900.
Cylinder 10″ x 12″.
Complete with attached pump.
9 Ft high ~ Wt approx 3500 KGs.
In unrestored condition.
(With some loose parts not shown.)
BOULTON & WATT Connecting Rods x3
A set of 3 very large connecting rods, taken from the last waterworks triple expansion engine built by Boulton & Watt, c1900 for Selby Waterworks.
(The rest of the engine dismantled and scrapped.)
Approx 6 Ft 11 Inches Long.
SOLD 
£7,500.00
EASTONS AMOS & ANDERSON Steam Pumping Engine, 1870
Twin Cylinder Double Acting
Designed to lift 50 tons of water per minute.
Built in London in 1870 for land drainage in Norfolk.
Complete with original wooden flushing gates and turbine pump.
In generally good condition.
SOLD 
£2,000.00
POLLIT & WIGZELL Steam Engine ‘Barring Engine’
Single Cylinder Inverted Vertical
with declutchable reduction gear.
Designed for turning over (barring) large stationary engines, this attractive open crank engine sits on a massive cast base featuring reduction gears and a Bendix declutching drive gear.
*Correction* Although believed built by Pollit & Wigzell, Bradford this engine is actually badged “Stephenson”.
Cylinder 4″ x 6″ (approx).
Approx 50″ High, Bed 32″ Long x 21″ Wide.
Wt approx 600 Kg.
In excellent restored condition.
Steam Engine Barring Engine, Duplex Cylinders 5″ x 8″
Twin Cylinder Inverted Vertical
With declutchable reduction gear.
A powerful duplex engine designed for turning over (barring) very large stationary engines.
Cylinders 5″ x 8″ (approx).
Wt approx 750 Kg.
In good, original but unrestored condition.
F. PEARNS & Co. Wall Mounted Workshop Engine, Vertical Cylinder 4″ x 6″
Single Cylinder Inverted Vertical
A wall mounted engine made in Manchester c1900.
Cylinder 4″ x 6″.
Wt approx 100 Kg.
In unrestored condition.
Currently dismantled but complete.
LAWRENCE & Co. Workshop Engine Vertical Cylinder 3″ x 5″
Single Cylinder Inverted Vertical
~ U.S.A. Built, c1900 ~
Cylinder 3″ x 5″ (approx).
Cast “bottle” type frame.
Additional pulley wheel fitted.
Wt est 100 Kg.
In good, restored condition.
