TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
Out of stockAsk us for more Information
RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
A.G. MUMFORD Steam Yacht Engine
Compound Marine Engine
Thought to be by A.G. Mumford, Colchester, c1910.
5″ + 10″ x 8″ Cylinders with Slide Valves.
Stephenson link reversing gear.
Twin air pumps and boiler feed pumps.
Approx 42″ High, Bed 40″ Long x 18″ Wide.
A very well made Mumford engine probably designed for a small steam yacht. For sale in good, original condition.
A rare paddleboat steam engine, this is a large long-stroke horizontal compound that has been removed from a boat and undergone significant restoration work.
Now available for sale, this unusual engine will no doubt find a suitable home.
Price On Application
Single Cylinder Steam Engine 1¾” x 2¾”
Approx 1¾” x 2¾” Cylinder
A German made vertical reversing steam engine, set up as a stationary engine with governor mechanism, but could also be used in a steam boat.
A very nicely made and attractive little engine.
23″ high overall including wooden base.
TWIN HIGH PRESSURE Steam Engine
2 1/2″ + 2 1/2″ x 3″ Cylinders
20″ High, on Base 22″ x 12″.
A Marine type steam engine with slide valves
on six turned columns and with solid flywheel.
10″ Dia flywheel.
In good condition.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.