SOLD
STUART TURNER ‘Swan’ 2 Cylinder Marine Engine
£ P.O.A.
Complete with boiler feed and air pumps, etc. A well made plant, unused and ready to install.
Related Items
RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
SOLD
£1,500.00
Taylor Vertical Steam Launch Engine, 2½” x 2½” Cylinder
2½” x 2½” Cylinder.
Approx 30″ High.
Unused engine built to a high standard and in excellent condition.
Three bearing crankshaft with enlarged bewaring areas. Stephenson link reverse gear. Connecting rod is bored to provide oil reservoir for big end. Positive displacement pump for steam oil supply.
For sale in good condition and suitable for use in a steam launch of around 18
Ft.
SIMPSON STRICKLAND Auxiliary Marine Engine 3½” x 4″
Approx 3½” x 4″ Cylinder
Piston valve, on 4 turned columns.
Approx 21″ High, solid flywheel 8″ Dia.
A very rare, high quality small marine engine made for auxiliary use in small steam boats. For sale in excellent condition.
Single Cylinder Marine Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
An attractive single cylinder high speed
piston valved marine engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
For sale in good condition.
WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence
and a museum worthy engine.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.
In good original condition.
COMPOUND Steam Launch Engine 2″ + 5″ x 6″
2″ + 5″ x 6″ Cylinders
With slide valves, on cast standards.
Wt est 250 Kg.
An early marine steam engine of elegant design.