RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
Taylor Vertical Steam Launch Engine, 2½” x 2½” Cylinder
2½” x 2½” Cylinder.
Approx 30″ High.
Unused engine built to a high standard and in excellent condition.
Three bearing crankshaft with enlarged bewaring areas. Stephenson link reverse gear. Connecting rod is bored to provide oil reservoir for big end. Positive displacement pump for steam oil supply.
For sale in good condition and suitable for use in a steam launch of around 18
Single Cylinder Steam Engine 1¾” x 2¾”
Approx 1¾” x 2¾” Cylinder
A German made vertical reversing steam engine, set up as a stationary engine with governor mechanism, but could also be used in a steam boat.
A very nicely made and attractive little engine.
23″ high overall including wooden base.
TWIN HIGH PRESSURE Marine Engine
2″ + 2″ x 4 1/4″ Cylinders
29″ High, Base 12″ x 12″.
Solid disc flywheel.
In good condition.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.