SOLD
Single Cylinder Steam Launch Engine 3½” x 2″
£2,750.00
Approx 3½” x 2″ Cylinder
Base 13″ x 13″, 21″ high overall.
An attractive single cylinder high speed
steam launch engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
In good, restored condition.
Sold
Related Items
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
SOLD 
£5,500.00
TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
SOLD 
£ P.O.A.
Compound Steam Launch Engine
120 + 250 x 117 mm Cylinders
A continental built launch engine with link motion reversing gear. On turned front columns and cast back standards, with integral surface condenser. A high quality launch engine of around 40-50 HP @ 250 rpm, at 150 psi.
SOLD
SOLD 
£3,500.00
LACK Single Cylinder Launch Engine 4″ x 4″
Approx 4″ x 4″ Cylinder
Base 18″ x 14″, 32″ high overall.
Slide valve with link reversing gear.
An attractive single cylinder steam launch
engine on turned columns with
attached boiler feed pump.
Solid disc flywheel.
Wt approx 70 Kg.
In good, restored condition.
SOLD
WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence
and a museum worthy engine.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.
In good original condition.
SOLD 
£7,500.00
SIMPSON STRICKLAND Tandem Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 3″
Overall 29″ High x 10″ Long x 11″ Wide.
This is an extremely unusual, if not unique tandem compound marine steam engine, with reversing gear and integral boiler feed and air pumps. Throught to be by Simpson Strickland of Dartmouth, c1900. This engine is of an elegant design suitable for a small Thames type launch, and with it’s small footprint and low weight will provide an excellent power to weight/space ratio.
In nice original condition.
HARRISON & Co. Compound Marine Engine
Built in Lowestoft c1900
6″ + 12″ x 7″ Cylinders with Slide Valves
A high quality launch engine.
On six turned columns.
With attached air, feed and bilge pumps.