Single Cylinder Horizontal Workshop Engine 3½” x 5″ Cylinder
Approx 3½” x 5″ Cylinder
An elaborate and solidly constructed small workshop engine of c1910 on cast bedplate with attached boiler feed pump, plus nicely made governor and mechanical lubricator. Mounted on wooden display bed.
METCALF Tandem Compound Mill Engine
This medium sized horizontal engine drove a brickfield in the home counties, before is was restored and exhibited in a West Country museum.
Of around 100 to 150 HP, this rare engine is in basic good condition and is believed to be complete.
PUGSLEY Steam Crane Engine Twin Cylinders 6″ x 14″.
Twin Cylinders 6″ x 14″.
Wt approx 200 KGs.
A rare machine by Joseph Pugsley & Sons of Bristol.
Without crankshaft but very original and in generally very good, little used condition.
Workshop Engine, Horizontal Single Cylinder 2″ x 4″
Single Cylinder Horizontal
Maker unknown c1900.
Cylinder 2″ x 4″. Wt approx 25 KGs.
In good condition.
E.S. HINDLEY Single Cylinder Horizontal Workshop Engine 4″ x 7″ Cylinder
Thought to be by E.S. Hindley, c1900?
Approx 4″ x 7″ Cylinder. Wt est 200 Kg.
34″ Wide x 5 ft 4″ Long ~ Flywheel 36″ Dia.
(Photo shows engine with flywheel removed.)
GREENS & Co. Single Cylinder Horizontal 3″ x 6″ Cylinder
~ Built in London c1900 ~
3″ x 6″ Cylinder (approx).
18″ Dia Fylwheel ~ Wt approx 150 Kg.
In good restored condition, with Pickering governor.