SIMPSON STRICKLAND Auxiliary Marine Engine 3½” x 4″
Approx 3½” x 4″ Cylinder
Piston valve, on 4 turned columns.
Approx 21″ High, solid flywheel 8″ Dia.
A very rare, high quality small marine engine made for auxiliary use in small steam boats. For sale in excellent condition.
RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
LACK Single Cylinder Launch Engine 4″ x 4″
Approx 4″ x 4″ Cylinder
Base 18″ x 14″, 32″ high overall.
Slide valve with link reversing gear.
An attractive single cylinder steam launch
engine on turned columns with
attached boiler feed pump.
Solid disc flywheel.
Wt approx 70 Kg.
In good, restored condition.
TWIN HIGH PRESSURE Marine Engine
2″ + 2″ x 4 1/4″ Cylinders
29″ High, Base 12″ x 12″.
Solid disc flywheel.
In good condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.
In good original condition.
SIMPSON STRICKLAND Tandem Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 3″
Overall 29″ High x 10″ Long x 11″ Wide.
This is an extremely unusual, if not unique tandem compound marine steam engine, with reversing gear and integral boiler feed and air pumps. Throught to be by Simpson Strickland of Dartmouth, c1900. This engine is of an elegant design suitable for a small Thames type launch, and with it’s small footprint and low weight will provide an excellent power to weight/space ratio.
In nice original condition.
SIMPSON STRICKLAND Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 2 1/2″
Overall 19″ High x 17″ Long x 10 1/2″ Wide.
A very nice lightweight launch engine by the ‘Rolls-Royce’ of marine engine builders, Simpson Strickland of Dartmouth. Cross compound with slide valves and Stevenson link reversing gear, and provision integral boiler feed and air pumps. Cylinder covers complete with maker’s engraved caps. This small and elegant compound engine suitable for a medium sized river launch.