RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
LACK Single Cylinder Launch Engine 4″ x 4″
Approx 4″ x 4″ Cylinder
Base 18″ x 14″, 32″ high overall.
Slide valve with link reversing gear.
An attractive single cylinder steam launch
engine on turned columns with
attached boiler feed pump.
Solid disc flywheel.
Wt approx 70 Kg.
In good, restored condition.
Single Cylinder Marine Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
An attractive single cylinder high speed
piston valved marine engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
For sale in good condition.
TWIN HIGH PRESSURE Steam Engine
2 1/2″ + 2 1/2″ x 3″ Cylinders
20″ High, on Base 22″ x 12″.
A Marine type steam engine with slide valves
on six turned columns and with solid flywheel.
10″ Dia flywheel.
In good condition.
OUTRIDGES PATENT Rotary Steam Launch Engine
This is an extremely rare, vane type reversable steam engine of around 4 – 5 H.P. believed made to Outridges patent in the mid 1880’s.
Designed for small, high speed river launches, these rotaty engines were claimed to provide an excellent power to weight ratio and to achieve the then unheard of speed of 12 1/4 m.p.h!
WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence
and a museum worthy engine.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.