Compound Marine Engine
£ P.O.A.
A small compound marine engine.
Related Items
SOLD 
£ P.O.A.
Compound Steam Launch Engine
120 + 250 x 117 mm Cylinders
A continental built launch engine with link motion reversing gear. On turned front columns and cast back standards, with integral surface condenser. A high quality launch engine of around 40-50 HP @ 250 rpm, at 150 psi.
SOLD
SOLD 
£3,500.00
LACK Single Cylinder Launch Engine 4″ x 4″
Approx 4″ x 4″ Cylinder
Base 18″ x 14″, 32″ high overall.
Slide valve with link reversing gear.
An attractive single cylinder steam launch
engine on turned columns with
attached boiler feed pump.
Solid disc flywheel.
Wt approx 70 Kg.
In good, restored condition.
SOLD
SOLD 
£2,750.00
Single Cylinder Steam Launch Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
Base 13″ x 13″, 21″ high overall.
An attractive single cylinder high speed
steam launch engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
In good, restored condition.
TWIN HIGH PRESSURE Steam Engine
2 1/2″ + 2 1/2″ x 3″ Cylinders
20″ High, on Base 22″ x 12″.
A Marine type steam engine with slide valves
on six turned columns and with solid flywheel.
10″ Dia flywheel.
In good condition.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
SOLD 
£7,500.00
SIMPSON STRICKLAND Tandem Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 3″
Overall 29″ High x 10″ Long x 11″ Wide.
This is an extremely unusual, if not unique tandem compound marine steam engine, with reversing gear and integral boiler feed and air pumps. Throught to be by Simpson Strickland of Dartmouth, c1900. This engine is of an elegant design suitable for a small Thames type launch, and with it’s small footprint and low weight will provide an excellent power to weight/space ratio.
In nice original condition.
SOLD 
£9,000.00
SIMPSON STRICKLAND Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 2 1/2″
Overall 19″ High x 17″ Long x 10 1/2″ Wide.
A very nice lightweight launch engine by the ‘Rolls-Royce’ of marine engine builders, Simpson Strickland of Dartmouth. Cross compound with slide valves and Stevenson link reversing gear, and provision integral boiler feed and air pumps. Cylinder covers complete with maker’s engraved caps. This small and elegant compound engine suitable for a medium sized river launch.
In nice original condition.
SOLD 
£7,500.00
H. GUY & Co. Compound Steam Launch Engine
Cylinders 2 1/2″ + 5″ x 4 1/2″