BRITISH Made Compound Steam Launch Engine
£5,500.00
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.
In good original condition.
Related Items


STORK Triple Expansion Marine Engine
A large enclosed crank case compounding steam engine, presumed built by Stork Engineers of Holland. Ex a Naval college in Holland. For sale in dismantled condition (for storage and transport).
Cylinders 16″, 7″ and 5″ bore.
Crankcase housing approx: 7 Ft long x 3 Ft wide x 6 Ft high (total assembled height approx. 13 Ft).


Duplex Marine Engine
An unusual and elegant 5-10 H.P. twin cylinder marine engine. Built c1910, no makers plate but in good overall condition.


MOLEMA, LANDEWEER & STEMMER Compound Marine Engine
A 150 HP Compound Marine Engine by this Dutch maker.


1898 US Navy Type B Compound Marine Engine
10 IHP
Fully restored and for sale in excellent condition.


RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.


SIMPSON DENNISON Tandem Compound Launch Engine
Cylinder dimensions:
2½” + 4½” x 4” stroke
Overall engine dimensions: 31 inches high, 17 inches wide and 16 inches deep.
A reversing marine engine with tandem compound cylinders, Stephenson slotted link valve gear,
crosshead-driven feed pumps, lubrication system, draincocks and mahogany lagging.
This very rare engine by Simpson Dennison of Dartmouth was built 1885, prior to the company name change to Simpson Strickland & Co.


TWIN HIGH PRESSURE Steam Engine
2 1/2″ + 2 1/2″ x 3″ Cylinders
20″ High, on Base 22″ x 12″.
A Marine type steam engine with slide valves
on six turned columns and with solid flywheel.
10″ Dia flywheel.