TWIN HIGH PRESSURE Marine Engine
2″ + 2″ x 4 1/4″ Cylinders
29″ High, Base 12″ x 12″.
Solid disc flywheel.
In good condition.
OUTRIDGES PATENT Rotary Steam Launch Engine
This is an extremely rare, vane type reversable steam engine of around 4 – 5 H.P. believed made to Outridges patent in the mid 1880’s.
Designed for small, high speed river launches, these rotaty engines were claimed to provide an excellent power to weight ratio and to achieve the then unheard of speed of 12 1/4 m.p.h!
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.
In good original condition.
SIMPSON STRICKLAND Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 2 1/2″
Overall 19″ High x 17″ Long x 10 1/2″ Wide.
A very nice lightweight launch engine by the ‘Rolls-Royce’ of marine engine builders, Simpson Strickland of Dartmouth. Cross compound with slide valves and Stevenson link reversing gear, and provision integral boiler feed and air pumps. Cylinder covers complete with maker’s engraved caps. This small and elegant compound engine suitable for a medium sized river launch.
In nice original condition.
HARRISON & Co. Compound Marine Engine
Built in Lowestoft c1900
6″ + 12″ x 7″ Cylinders with Slide Valves
A high quality launch engine.
On six turned columns.
With attached air, feed and bilge pumps.
For sale unrestored, but believed complete.
Offered with spares for second engine.
350 H.P. Compound Marine engine
18″ + 31″ x 16″ Cylinders
Approx 336 IHP at 130 r.p.m.
Turned front columns, cast back standards.
Stevenson link reversing gear.
Complete with pump, lubricators and thrust bearings. Built 1893 in Jonkoping, Sweden.