A.G. MUMFORD Steam Yacht Engine
Compound Marine Engine
Thought to be by A.G. Mumford, Colchester, c1910.
5″ + 10″ x 8″ Cylinders with Slide Valves.
Stephenson link reversing gear.
Twin air pumps and boiler feed pumps.
Approx 42″ High, Bed 40″ Long x 18″ Wide.
A very well made Mumford engine probably designed for a small steam yacht. For sale in good, original condition.
Out of stockAsk us for more Information
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
Taylor Vertical Steam Launch Engine, 2½” x 2½” Cylinder
2½” x 2½” Cylinder.
Approx 30″ High.
Unused engine built to a high standard and in excellent condition.
Three bearing crankshaft with enlarged bewaring areas. Stephenson link reverse gear. Connecting rod is bored to provide oil reservoir for big end. Positive displacement pump for steam oil supply.
For sale in good condition and suitable for use in a steam launch of around 18
Single Cylinder Steam Engine 1¾” x 2¾”
Approx 1¾” x 2¾” Cylinder
A German made vertical reversing steam engine, set up as a stationary engine with governor mechanism, but could also be used in a steam boat.
A very nicely made and attractive little engine.
23″ high overall including wooden base.
OUTRIDGES PATENT Rotary Steam Launch Engine
This is an extremely rare, vane type reversable steam engine of around 4 – 5 H.P. believed made to Outridges patent in the mid 1880’s.
Designed for small, high speed river launches, these rotaty engines were claimed to provide an excellent power to weight ratio and to achieve the then unheard of speed of 12 1/4 m.p.h!
WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence
and a museum worthy engine.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.