350 H.P. Compound Marine engine
18″ + 31″ x 16″ Cylinders
Approx 336 IHP at 130 r.p.m.
Turned front columns, cast back standards.
Stevenson link reversing gear.
Complete with pump, lubricators and thrust bearings. Built 1893 in Jonkoping, Sweden.
For sale in good condition.
SISSONS Quadruple Expansion Marine Engine
6” + 8½” +12″ + 16½” x 12” stroke
The ultimate medium sized marine engine….
Price On Application
TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
Single Cylinder Steam Engine 1¾” x 2¾”
Approx 1¾” x 2¾” Cylinder
A German made vertical reversing steam engine, set up as a stationary engine with governor mechanism, but could also be used in a steam boat.
A very nicely made and attractive little engine.
23″ high overall including wooden base.
OUTRIDGES PATENT Rotary Steam Launch Engine
This is an extremely rare, vane type reversable steam engine of around 4 – 5 H.P. believed made to Outridges patent in the mid 1880’s.
Designed for small, high speed river launches, these rotaty engines were claimed to provide an excellent power to weight ratio and to achieve the then unheard of speed of 12 1/4 m.p.h!
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.