REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
LACK Single Cylinder Launch Engine 4″ x 4″
Approx 4″ x 4″ Cylinder
Base 18″ x 14″, 32″ high overall.
Slide valve with link reversing gear.
An attractive single cylinder steam launch
engine on turned columns with
attached boiler feed pump.
Solid disc flywheel.
Wt approx 70 Kg.
In good, restored condition.
TWIN HIGH PRESSURE Steam Engine
2 1/2″ + 2 1/2″ x 3″ Cylinders
20″ High, on Base 22″ x 12″.
A Marine type steam engine with slide valves
on six turned columns and with solid flywheel.
10″ Dia flywheel.
In good condition.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.