WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence
and a museum worthy engine.
Category: Marine Steam Engines
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
TWIN HIGH PRESSURE Steam Engine
2 1/2″ + 2 1/2″ x 3″ Cylinders
20″ High, on Base 22″ x 12″.
A Marine type steam engine with slide valves
on six turned columns and with solid flywheel.
10″ Dia flywheel.
In good condition.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
SIMPSON STRICKLAND Tandem Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 3″
Overall 29″ High x 10″ Long x 11″ Wide.
This is an extremely unusual, if not unique tandem compound marine steam engine, with reversing gear and integral boiler feed and air pumps. Throught to be by Simpson Strickland of Dartmouth, c1900. This engine is of an elegant design suitable for a small Thames type launch, and with it’s small footprint and low weight will provide an excellent power to weight/space ratio.
In nice original condition.
SIMPSON STRICKLAND Compound Launch Engine
Cylinders 3″ + 1 1/2″ x 2 1/2″
Overall 19″ High x 17″ Long x 10 1/2″ Wide.
A very nice lightweight launch engine by the ‘Rolls-Royce’ of marine engine builders, Simpson Strickland of Dartmouth. Cross compound with slide valves and Stevenson link reversing gear, and provision integral boiler feed and air pumps. Cylinder covers complete with maker’s engraved caps. This small and elegant compound engine suitable for a medium sized river launch.