WALLER Single Cylinder Horizontal Workshop Engine
A small, handsome single cylinder engine built by Waller & Son of Stroud, Glos. Probably built post WWII, now in fully restored condition and ready to run. Presented on a box-section steel bed.
METCALF Tandem Compound Mill Engine
This medium sized horizontal engine drove a brickfield in the home counties, before is was restored and exhibited in a West Country museum.
Of around 100 to 150 HP, this rare engine is in basic good condition and is believed to be complete.
Steam Winch Engine, Horizontal Mounting Twin cylinders 4″ x 6″
Maker unknown (?) but of very high quality.
Cylinders 4″ x 6″ Stroke.
Bedplate 3 Ft 6″ Long x 2 Ft 6″.
Wt est 300 Kg.
In good, restored condition.
Twin Cylinder Horizontal, Duplex Cylinders Approx 2″ x 3½”
On heavy cast iron base with attached feed pump.
Base approx 23″ long x 13″ Wide.
Wt approx 75 KGs.
In good original condition.
Single Cylinder Horizontal Workshop Engine 2″ x 4½” Cylinder
A high quality engine, maker unknown, c1890.
Drove a cobblers shop until 1970.
2″ x 4½” Cylinder (approx).
Wt approx 35 Kg.
Unrestored but in good, original condition.
LEFLAIVE & Cie. Horizontal Mill Engine
12″ x 18″ Stroke Single Cylinder
A very attractive small French mill engine of c1900 complete with a large and ornate governor. For sale in original, unrestored condition. (Note: some photos show engine in original situation.)
TANGYE & Co. Single Cylinder Horizontal Mill Engine 8″ x 20″ Cylinder
Built by Tangye & Co, Birmingham c1890
8″ x 20″ Cylinder.
Flywheel 6 ft x 10″ ~ Bed 9 ft Long.
Wt est 3-4 Tonnes ~ Overall 11 ft x 6 ft.
In unrestored condition.
GREENS & Co. Single Cylinder Horizontal 3″ x 6″ Cylinder
~ Built in London c1900 ~
3″ x 6″ Cylinder (approx).
18″ Dia Fylwheel ~ Wt approx 150 Kg.
In good restored condition, with Pickering governor.