Gunboat Marine Engine and Boiler
£ P.O.A.
Reverable compound marine steam engine:
5 + 9 x 5¾ Inch Cylinders
(attached propellor: 24x 36 Inch pitch
Boiler 120 psi, copper tubes
Related Items
RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
A.G. MUMFORD Steam Yacht Engine
Compound Marine Engine
Thought to be by A.G. Mumford, Colchester, c1910.
5″ + 10″ x 8″ Cylinders with Slide Valves.
Stephenson link reversing gear.
Twin air pumps and boiler feed pumps.
Approx 42″ High, Bed 40″ Long x 18″ Wide.
A very well made Mumford engine probably designed for a small steam yacht. For sale in good, original condition.
3 Drum Water Tube Marine Boiler
A three drum boiler with steam collector and optional super heater. Rated at 350 – 400 lbs per hour at 150 psi working pressure when burning oil, also suitable for coal, wood or gas firing.
A marine type boiler designed for a steam launch. This was built by Anthony Beaver but remained unused until first steaming in 2010, since when it has been used for some 270 hours. Now available for sale with full test certification.
Cochran Pattern Vertical Steam Boiler
A welded construction coal fired steam boiler, built in the 1970’s/1980’s, apparently unused and designed for steam launch, steam car or stationary use.
Approx. 4 Ft high and working pressure 175 psi, with an estimated output of approx. 300 lbs/hr.
MARSHALL Portable Steam Boiler
An ex-Admiralty (Royal Navy) dockyard boiler, built by Marshall & Sons Ltd, Gainsborough c1940.
Used for engine running and other testing purposes at a Royal Navy dockyard, this high output steam boiler is of riveted construction and sits on Marshall’s sprung type wheels. For sale with most fittings including safety valve and gauge glass frames, etc.
Believed in reasonable, usable condition.
MARSHALL Portable Steam Boiler
An ex-Admiralty (Royal Navy) dockyard boiler, built by Marshall & Sons Ltd, Gainsborough c1940.
Used for engine running and other testing purposes at a Royal Navy dockyard, this high output steam boiler is of riveted construction and sits on Marshall’s sprung type wheels. For sale with most fittings including safety valve and gauge glass frames, etc.
Believed in reasonable, usable condition.
