DODMAN Single Cylinder Horizontal Workshop Engine 4″ x 6″ cylinder
A small, elegant bayonet framed horizontal.
Thought to be by Alfred Dodman & Co, Ltd.
4″ x 6″ cylinder with lubricator and drain cocks.
Fylwheel 16″ Dia ~ Approx 44″ Long.
Complete with small 1/2″ Pickering governor.
A proper factory made workshop engine.
Category: Horizontal Engines
METCALF Tandem Compound Mill Engine
This medium sized horizontal engine drove a brickfield in the home counties, before is was restored and exhibited in a West Country museum.
Of around 100 to 150 HP, this rare engine is in basic good condition and is believed to be complete.
Steam Winch Engine, Horizontal Mounting Twin cylinders 4″ x 6″
Maker unknown (?) but of very high quality.
Cylinders 4″ x 6″ Stroke.
Bedplate 3 Ft 6″ Long x 2 Ft 6″.
Wt est 300 Kg.
In good, restored condition.
LEFLAIVE & Cie. Horizontal Mill Engine
12″ x 18″ Stroke Single Cylinder
A very attractive small French mill engine of c1900 complete with a large and ornate governor. For sale in original, unrestored condition. (Note: some photos show engine in original situation.)
TANGYE & Co. Single Cylinder Horizontal Mill Engine 8″ x 20″ Cylinder
Built by Tangye & Co, Birmingham c1890
8″ x 20″ Cylinder.
Flywheel 6 ft x 10″ ~ Bed 9 ft Long.
Wt est 3-4 Tonnes ~ Overall 11 ft x 6 ft.
In unrestored condition.
E.S. HINDLEY Single Cylinder Horizontal Workshop Engine 4″ x 7″ Cylinder
Thought to be by E.S. Hindley, c1900?
Approx 4″ x 7″ Cylinder. Wt est 200 Kg.
34″ Wide x 5 ft 4″ Long ~ Flywheel 36″ Dia.
(Photo shows engine with flywheel removed.)
GREENS & Co. Single Cylinder Horizontal 3″ x 6″ Cylinder
~ Built in London c1900 ~
3″ x 6″ Cylinder (approx).
18″ Dia Fylwheel ~ Wt approx 150 Kg.
In good restored condition, with Pickering governor.