DE KLOP Compound Marine Engine
Builder: Machine factory “De Klop” Sliedrecht, Holland
Serial number: 274
Horsepower: appr. 120 Hp
Crankshaft stroke: 300 mm
Cylinder dimensions: HP – appr. 265 mm / LP – appr. 525 mm
Pressure: 10 Atm.
Reversal movement: Stephenson
Crankshaft section: 105 mm
Frame: 1170 mm x 1170 mm
Height: 2050 mm
Height incl. safety valve: 2220 mm
Total size: L. 1700 mm x W. 1400mm
Total weight: 3.400 KG
TWIN HIGH PRESSURE Marine Steam Engine
3″ + 3″ x 5″ Cylinders.
Approx 30″ High.
An English factory made marine steam engine with slide valves and Stephenson Link reversing gear.
On cast standards and fitted with later toothed flywheel for belt work. For sale complete and in good condition.
Single Cylinder Marine Engine 3½” x 2″
Approx 3½” x 2″ Cylinder
An attractive single cylinder high speed
piston valved marine engine on four turned columns.
With a solid disc flywheel.
Wt approx 90 Kg.
For sale in good condition.
OUTRIDGES PATENT Rotary Steam Launch Engine
This is an extremely rare, vane type reversable steam engine of around 4 – 5 H.P. believed made to Outridges patent in the mid 1880’s.
Designed for small, high speed river launches, these rotaty engines were claimed to provide an excellent power to weight ratio and to achieve the then unheard of speed of 12 1/4 m.p.h!
WILLANS 3 Cylinder Steam Launch Engine
~ A ‘modern’ design, built 1880’s ~
This is a very rare, if not unique enclosed type marine engine with reversing gear.
2″ x 4 1/2″ Cylinders ~ Approx 30″ High.
A very rare small enclosed marine steam engine.
Designed for a small steam launch.
In good original condition.
Possibly the earliest Willans in existence
and a museum worthy engine.
3 Cylinder Steam Launch Engine + Condenser and Feed Pumps
Steam Plant Comprising
An unusual design of engine with three 4″ bore cylinders with attached air & feed pumps, plus bronze condenser.
4″ + 4″ + 4″ x 4″ Cylinders with Slide Valves.
Approx 24″ High, Bed 3 Ft Long x 13 1/2″ Wide.
In original condition.
BRITISH Made Compound Steam Launch Engine
A British made steam launch engine.
1 1/2″ + 3 1/2″ x 4″ Cylinders
Approx 27″ High, and 14″ x 12″ Wide at Feet.
A circa 1920’s design with piston valves.
Suitable for a steam launch.