19th Century Model Single Cylinder Horizontal Mill Engine
£950.00
Approx 1 1/4″ bore x 2″ stroke.
A very elegant, good quality 19th century
model requiring minor restoration.
Sold
Ask us for more InformationRelated Items


British Engineering & Electrical Company I.C. Workshop Engine
A water cooled example of an open crank I.C. engine, made c1904 by the British Engineering and Electrical Company of Leek, Staffs.
Approx 1/3 HP
With later chain driven magneto (replacing the hot tube ignition), and fitted with twin S-spoked flywheels.
Mounted on a 2 wheel trolley inscibed “B E & E”.
A rare survivor.
SOLD


Early I.C. Workshop Engine
A small I.C. engine of approx 1/2 H.P., thought to be Victorian.
Horizontal open crank with S-spoked flywheel. Possibly by Stuart Turner and mounted on a 2 wheel trolley.
In apparent good order, but not tested.
SOLD


Six Column Beam Engine, Victorian
This highly elegant beam engine dates from the mid 19th Century and is from the well known Jonathan Minns collection.
Very good detail work including fluted columns.
Around 1 HP, with approx 3″ x 6″ inverted vertical cylinder. Complete with governor and pumps.


A-FRAME ENGINE Vertical Single Cylinder 1½” x 2½”
Single Cylinder True Vertical
A small, Gothic style A-frame, over-crank type workshop engine, Built circa 1860 and ex a well known museum collection.
1½” x 2½” Cylinder
‘S’ spoked flywheel for belt drive.
Approx 18″ high x 11″ wide.
Provision for an optional 2nd cylinder.
In nice, original condition.


c1900 Model Steam Plant, Brass
Hand made for display, this is a very nicely made miniature steam plant dating from circa 1900. Comprises a vertical rivetted copper boiler (coal/wood fired) and horizontal single cylinder steam engine, both mounted on a brass and wood base.
In very nice original condition, and a handsome display object.


Model Single Cylinder Horizontal Workshop Engine
Cylinder approx 1″ bore x 3″ stroke.
This is a nicley made miniature horizontal steam engine thought to be of c1930. Bed frame is mounted on a wooden base approx 20″ long x 7″ wide overall.
In nice, untouched condition, this engine will benefit from a little cosmetic improvement.
SOLD

Model Single Cylinder Vertical Workshop Engine
A simple but attractive inverted vertical engine on 4 columns and with solid flywheel.
Approx 3/4″ x 2″ cylinder.
Approx 12 tall.
Well made and in good condition.
