RANSOMES, SIMS & JEFFERIES Compound Marine Engine
With Radial Valve Gear
Approx 35 H.P.
~ Built c1905 ~
Complete with boiler, propeller and auxiliaries.
For sale in good, original condition.
A.G. MUMFORD Steam Yacht Engine
Compound Marine Engine
Thought to be by A.G. Mumford, Colchester, c1910.
5″ + 10″ x 8″ Cylinders with Slide Valves.
Stephenson link reversing gear.
Twin air pumps and boiler feed pumps.
Approx 42″ High, Bed 40″ Long x 18″ Wide.
A very well made Mumford engine probably designed for a small steam yacht. For sale in good, original condition.
SIMPSON DENNISON Tandem Compound Launch Engine
2½” + 4½” x 4” stroke
Overall engine dimensions: 31 inches high, 17 inches wide and 16 inches deep.
A reversing marine engine with tandem compound cylinders, Stephenson slotted link valve gear,
crosshead-driven feed pumps, lubrication system, draincocks and mahogany lagging.
This very rare engine by Simpson Dennison of Dartmouth was built 1885, prior to the company name change to Simpson Strickland & Co.
SIMPSON STRICKLAND Compound Steam Launch Engine
A very handsome light-weight marine engine from a steam launch.
REIDS Twin High Pressure Marine Engine
By Reids of Glasgow, c1900.
2.5″ + 2.5″ x 4″ Cylinders
Slide valves with link reversing gear.
For sale in good condition.
Steam Launch “BELLE”
This vessel was built in Kingston upon Thames in 1894. She worked out of Worcester on the Severn for 80 years, and she last worked in 2009.
Potential for private yacht or historic passenger carrier. She was licensed to carry 100 passengers. Equipped with galley, bar and 2 WCs with ornate hand basins, and a large dining area.
Converted from steam, now fitted with Gardner 84hp diesel engine.
Teak on oak framed hull, lowering funnel and awnings for low bridges, original ship’s wheel and telegraph, modern electrics, transportable by road.
L.O.A. 75ft (22.86 Mtrs), Beam 15ft, Draft 4ft 9”
Displacement: 24,000 kg
Official No: 118486
National Register of Historic Vessels: No.272
Price On Application
Marine Circulating Engine and Pump
This German made marine circulating pump consists of a single cylinder marine engine and turbine water pump, in cast iron and on a cast iron bed. Built 1909 this engine is complete and for sale in good condition with lubricator and flywheel, etc.
1.3 Metres high
1.1 Metres wide
Weight approx. 200 Kg
Single Cylinder Steam Launch Engine
This single cylinder reversable marine engine has a handsome cast iron backstand frame and is fitted with Stephenson type link reversing gear.