4 Inch Scale FOWLER Road Loco
4 Inch Scale FOWLER Road Loco
4 Inch Scale FOWLER Road Loco

“KITCHENER”

A magnificent 4” scale 3 speed Fowler road loco. This engine was built over a twenty year period by an experienced model engineer, from works drawings and actual measurements, using his own patterns (and NOT to Plastow design).

Boiler professionally built, again to works drawings. Reported to run very well, it has attended only some twenty rallies.

Engine is in correct Fowler black livery and on properly proportioned rubbers. For sale with full current boiler test certificates.

£35,000.00
SOLD
6 Inch Scale GARRETT 4CD Tractor
6 Inch Scale GARRETT 4CD Tractor
6 Inch Scale GARRETT 4CD Tractor

A handsome and very usable half-size miniature engine based on the Garrett 4CD tractor.

Completed in recent years to a very high standard and barely used since, this engine is now available for sale in excellent condition with current boiler certificates.

(Video below.)

£35,000.00
SOLD
4 Inch Scale FOWLER Showmans Road Locomotive
4 Inch Scale FOWLER Showmans Road Locomotive
4 Inch Scale FOWLER Showmans Road Locomotive

A nicely constructed 4″ scale showmans engine with removable ‘scenic’ crane to rear. Fully sprung, compound engine, complete showmans specification.

For sale in good condition with newly issued boiler certificiates.

SOLD

£ P.O.A.
SOLD
4½ Inch Scale BURREL Traction Engine
4½ Inch Scale BURREL Traction Engine
4½ Inch Scale BURREL Traction Engine

A very usable size of engine, this is based on Plastow miniature of the Burrell 7 NHP agricultural.

 

This example appears to be nicely made with a professional steel boiler.

 

For sale in excellent condition with current boiler certificates and complete with water cart trailer.

£17,500.00
SOLD
4 Inch Scale GARRETT Traction Engine
4 Inch Scale GARRETT Traction Engine
4 Inch Scale GARRETT Traction Engine

An very well made and presented example of this scale engine, based on the 7 NHP Garrett agricultural traction engine.

With professional boiler and for sale with current boiler certificates.

SOLD

£ P.O.A.
SOLD
6 Inch Scale FOSTER Traction Engine
6 Inch Scale FOSTER Traction Engine
6 Inch Scale FOSTER Traction Engine

This large, half size traction engine is based on the 7 NHP Foster agricultural traction engine.

With a professionally made and tested steel boiler, this part built engine is approximately 75% complete and includes machined cylinder, gears and shafts, etc and all major components are believed present.

For sale as an uncompleted project.

SOLD

£ P.O.A.
SOLD
6 Inch Scale BURRELL Traction Engine
6 Inch Scale BURRELL Traction Engine
6 Inch Scale BURRELL Traction Engine

Agricultural Traction Engine

This impressive half size engine is based on the Burrell 6 NHP agricultural traction engine and is for sale in good condition, with current boiler certificates.

SOLD

£ P.O.A.
SOLD
2 Inch Scale FOWLER Ploughing Engine
2 Inch Scale FOWLER Ploughing Engine
2 Inch Scale FOWLER Ploughing Engine

An unusual scale miniature of the large “SUPERBA” model ploughing engine built by John Fowler & Co., Leeds for the Italian market (which similar to the ‘K7’ model with various upgrades including superheater).

This miniature appears to be well made and detailed and is requiring some minor work to fully complete, including boiler lagging.

SOLD

£ P.O.A.
SOLD
4 Inch Scale SAVAGE “Little Samson” Steam Tractor
4 Inch Scale SAVAGE “Little Samson” Steam Tractor
4 Inch Scale SAVAGE “Little Samson” Steam Tractor

A rare miniature, this single cylinder engine is based on the F. Savage steam tractor.

This example appears to be very nicely made with a professional steel boiler, and is in excellent, near new condition with current boiler certificates. For sale complete with a high quality German made 4 wheel covered car trailer.

£17,500.00
PATTERNS For 6 Inch Scale BURRELL Traction Engines
PATTERNS For 6 Inch Scale BURRELL Traction Engines
PATTERNS For 6 Inch Scale BURRELL Traction Engines

A collection of wooden patterns for casting parts for 6″ scale (half size) Burrell agricultural engines.

Patterns include inc. differential, perch bracket, motion guides, chimney caps, hub caps, various hubs and bearings, firebars, etc.

 

£200.00
4 Inch Scale FOSTER Traction Engine
4 Inch Scale FOSTER Traction Engine
4 Inch Scale FOSTER Traction Engine

This unfinished miniature is an example of the popular 4″ scale single cylinder engine by Live Steam Miniatures, and based on the 6 NHP agricultural traction engine by William Foster & Co, Lincoln.

 

Various parts to form an uncompleted engine. Main components present, as per photo. (Including boiler, tender, wheels, smokebox, etc.)

£2,500.00